Sign In

Don't have an account Sign Up

  • Follow us on :

Sign Up

Already a member Sign In

  • Follow us on :

FT 650 Full Bore Flow Meter

Our Turbine Flow Meter has a flow sensor with a magnetic muti-bladed spinning rotor (impeller) mounted inside at right angles to the flow. The rotational speed of the impeller is proportional to the velocity of the fluid. The pulse generated is transmitted and converted into a volumetric measurement.

Features

  • Digital flow meter measuring flow rate from 0.05m³/hr to 500m³/hr
  • Combined indicator / Totalizer / Batcher / Rate switch / Pulsar mode
  • Dual sensor, dual line, single meter, for RO applications
  • Remote or local reset
  • Optional computer interface with RS485 or 4-20mA output
  • BATCHER AND TOTALIZER
  • Relay gets energized after a fixed quantity of water passes through the sensor. The batcher has a auto reset, manual reset & dual relay operation facility. Batch quantity counts downwards till zero value.

  • FLOW COMPARITOR
  • The meter is supplied with two sensors for RO permeate and reject line. The meter displays both the flow rates and calculates percentage recovery.

  • RATE SWITCH MODE
  • The relay is programmed to get energized whenever actual flow falls below the set value. Display shows "LOW FLOW RATE". Ideal for flow interlock, chemical dosing.

  • PULSER
  • Meter can be configured to any metering /dosing pump. Chemical dosing can be done on-line proportional to flow.

  • OPTIONAL DATA LOGGER
  • The flow meter is available with data logger option where flow rate & total flow with date and time is stored in a 2GB Memory card.